Weight Lifting Gloves Manufacturer in Pakistan: Custom Gym Gloves for Fitness Brands and Gyms

What a weight lifting gloves manufacturer should build for your brand

If you run a fitness brand, a gym chain or a supplement company that wants branded merch, choosing a weight lifting gloves manufacturer is less about finding someone who can stitch a pair of gloves and more about finding someone who understands how a glove behaves under a loaded barbell. A good gym glove protects the palm from callus-tearing friction, keeps the wrist stable on presses, and still lets the lifter feel the knurling. Get one of those wrong and your customers notice on their first heavy set.

ProXen Apparel is a custom manufacturer and exporter in Lahore, Pakistan, producing private label weight lifting gloves for overseas gyms, coaches and fitness labels. This guide walks through the styles, materials, padding, branding and ordering details we discuss with buyers before a single sample is cut, so you can brief any factory with confidence.

Gym glove styles: half-finger, full-finger, wrist-wrap and grip pads

Most product lines are built around three or four core silhouettes. Choosing the right mix depends on whether you sell to powerlifters, general gym members, CrossFit-style athletes or a corporate gifting audience.

• Half-finger (open finger) gloves: the classic gym glove. Fingers end at the middle phalanx, so lifters keep dexterity for plate loading and phone use while the palm is covered.
• Integrated wrist-wrap gloves: a half-finger glove with an elastic wrap, typically 3 to 4 inches wide, that circles the wrist and closes with hook-and-loop. Popular for pressing movements and the best seller for most fitness brands.
• Full-finger gloves: used by people who want full coverage for rowing machines, cable work and outdoor training in colder months.
• Palm grips and grip pads: minimal leather or synthetic pads with finger loops for pull-ups and gymnastics-style work; light to ship and easy to brand.
• Women's and slim-fit cuts: narrower palm pattern and shorter fingers, not just a smaller size of the men's glove.

Palm materials, backing fabrics and padding

The palm takes all the abrasion, so it drives both durability and price. The back of the hand needs to stretch and breathe. Padding sits between the two layers or is stitched onto the palm surface. The table below summarizes the options we quote most often.

Back-of-hand fabrics

The back panel is usually spandex blend, neoprene or air mesh. Spandex gives the snuggest fit, neoprene adds a little cushion and structure, and mesh is the coolest for hot gyms in Dubai or Australia. Many brands mix them: neoprene knuckle band with mesh body.

Padding placement

EVA foam or gel pads are placed under the knuckle line and at the base of the palm, where the bar rests during pulls and presses. A 2 to 4 mm pad is usually enough; thicker padding increases the effective bar diameter and makes grip harder. Perforating leather over the pad helps with sweat.

Construction details that separate good gloves from returns

Most glove failures happen at the same few points, so these are where we focus during development and inspection. When you compare factories, ask how each of these is handled.

• Double stitching and bartacks at the thumb crotch, the highest-stress seam on any gym glove.
• Wrist wrap stitched through a reinforced tab, not just the edge binding, so it does not tear away when pulled tight.
• Hook-and-loop sized to overlap fully at the smallest and largest wrist settings for each size.
• Pull tabs between the fingers so users can remove sweaty gloves without stretching the seams.
• Terry or microfiber thumb panel for wiping sweat, a small detail customers notice.
• Smooth internal seams or binding at finger openings to avoid rubbing on long sessions.

Branding and private label options

Gym gloves offer more logo real estate than people expect. The back of the hand, the wrist wrap, the palm and even the tab can all carry branding. We match brand colors with Pantone references and can work from a full tech pack or a simple sketch.

Popular choices include embossing or debossing on leather palms, silicone-printed logos that also add grip, rubber or PVC patches on the back panel, sublimated graphics on polyester mesh, heat transfer on the wrap, and embroidery on neoprene. For retail-ready packs we add woven or printed labels, hang tags, header cards and branded poly bags, so the gloves can go straight onto a gym shop wall or into an online store. If you also sell apparel, pairing gloves with custom compression wear or training gloves builds a fuller fitness range from one supplier.

Sizing and fit approval

Glove sizing is measured around the palm at the knuckles, excluding the thumb. A common unisex run is S to XXL, with optional XS for women's lines. Because the wrist wrap and finger length interact with palm width, we recommend approving a full size set after the first sample, not just one size. Mixed sizes are fine inside a single design order, so you can weight the size curve toward M and L the way most gym buyers do.

How to choose the best weight lifting gloves manufacturer in Pakistan

Pakistan is a major exporter of sports goods, and the Sialkot region is known worldwide for gloves, with Lahore a large apparel and accessories hub alongside it. That depth means plenty of choice, so use a checklist to separate the best weight lifting gloves brand in Pakistan for private label work from a generic trader.

• Do they ask about your end user (powerlifters, general gym members, women's line) before quoting?
• Will they make a single paid sample in your materials, with your logo, before bulk?
• Can they show palm and wrap options side by side and explain the trade-offs?
• Do they offer low minimums, roughly 25 to 50 pairs per design, for test launches?
• Do they prepare a commercial invoice, packing list and HS codes, and quote DDP on request?
• Do they reply quickly, ideally within 24 hours, with clear written specs?

Ordering, samples and shipping to the USA, UK, Canada, Australia and UAE

Our process is built for overseas buyers. You send a tech pack or reference images through the quote form, we confirm materials and decoration, and we produce one sample pair. Overseas customers can also order just 1 to 2 pairs, paid in USD and delivered to the door, to test fit and finish. Once the sample is approved, bulk production usually takes about 14 days.

Express shipping by DHL or FedEx typically takes 4 to 7 working days after dispatch; larger orders can move by air cargo or sea freight from Karachi. We ship regularly to buyers working with our USA custom manufacturing and UK private label programs, as well as Canada, Australia and Dubai.

Start your custom gym glove line with ProXen

Whether you want a single wrist-wrap glove to sell at your gym front desk or a full fitness accessory range, ProXen can develop it with you from the first sample. Browse the full custom gloves collection, read our guides to training gloves, grappling gloves and the overall gloves manufacturing guide, then request a quote with your design. Price depends on palm material, padding, decoration and quantity, and we will give you a clear breakdown.

Frequently asked questions